325 Slotted Vertical Hydraulic Oil Press Machine

The 325 Slotted Vertical Hydraulic Oil Press Machine is part of the vertical hydraulic oil pressing equipment range offered by GOOD OIL PRESS. It uses hydraulic pressure to compress properly prepared oil-bearing materials inside a vertical pressing chamber for batch oil extraction.

The machine features a slotted pressing chamber with narrow, vertically oriented oil drainage openings. During hydraulic compression, separated oil flows through these openings and is directed toward the oil collection area.

The 325 slotted model follows the same general hydraulic pressing principle as other vertical hydraulic oil presses in our product range. Its distinguishing feature compared with the 325 round-hole model is the design of the pressing chamber drainage openings.

Customers can contact us to discuss suitable machine configurations according to their raw materials, processing requirements and installation conditions.

⚙️ Product Highlights

325 Series | Vertical Slotted Pressing Chamber | Hydraulic Batch Pressing | Narrow Oil Drainage Slots | Separate Control Cabinet

🔧 Key Features

1. Narrow Vertical Slotted Pressing Chamber

The 325 slotted hydraulic oil press features a pressing chamber with narrow, vertically oriented drainage slots.

These openings provide passages for separated oil to flow out during hydraulic pressing.

Unlike the circular drainage openings used in the round-hole version, the slotted chamber uses elongated vertical openings. The suitability of each chamber design depends on the oil-bearing material and processing conditions.

2. Vertical Hydraulic Pressing System

The machine uses a hydraulic system to apply pressure to prepared oil-bearing materials inside the vertical pressing chamber.

The pressing process is carried out in batches. Actual operating conditions depend on the machine configuration, raw material characteristics and preparation method.

3. Separate Control Cabinet

The 325 series is presented with a separate control cabinet positioned beside the main pressing structure.

The control cabinet provides access to the hydraulic system controls. Specific control functions and operating procedures should follow the manufacturer's instructions for the selected machine.

4. Vertical Machine Structure

The equipment adopts a vertical arrangement consisting of the hydraulic pressing assembly, supporting frame, pressing chamber and machine base.

This structure allows the hydraulic system to compress the material inside the pressing chamber while separated oil drains through the narrow vertical slots.

5. Multiple Hydraulic Oil Press Models

GOOD OIL PRESS offers several vertical hydraulic oil press series, including 290, 325, 340 and 400 models.

These models share the general hydraulic pressing principle but differ in dimensions and available configurations.

Customers should compare confirmed technical specifications before selecting a machine.

📊 Technical Specifications

Specification

Details

Technical Note: The specifications above describe the general structure of the 325 slotted hydraulic oil press. Detailed power ratings, hydraulic cylinder dimensions, pressing chamber specifications, discharge arrangements and machine dimensions must be confirmed with the manufacturer before ordering.

🌻 Oilseed Processing Applications

Vertical hydraulic oil presses can be considered for batch processing of suitably prepared oil-bearing materials.

Depending on raw material characteristics, pretreatment methods and the selected equipment configuration, potential applications may include:

• Peanuts: Hydraulic pressing of appropriately prepared peanut materials.

• Sesame Seeds: Batch oil extraction applications involving prepared sesame seeds.

• Walnut Kernels: Processing of suitably prepared walnut kernels.

• Other Oil-Bearing Materials: Additional compatible seeds and kernels subject to technical evaluation.

Application Note: Oilseed compatibility depends on material characteristics, moisture content, pretreatment method and pressing conditions. The suitability of a specific material for the 325 slotted configuration should be confirmed before purchase.

🔄 Working Principle

Step 1: Raw Material Preparation

Clean and prepare the oil-bearing materials according to the required processing method.

Step 2: Chamber Loading

Load the prepared material into the vertical pressing chamber according to the machine's operating instructions.

Step 3: Hydraulic Compression

The hydraulic system applies pressure to compress the prepared material inside the pressing chamber.

Step 4: Oil Drainage and Collection

Separated oil flows through the narrow vertical drainage slots and is directed toward the collection area.

Step 5: Press Cake Removal

After the pressing cycle, the remaining press cake is removed according to the discharge procedure specified for the selected machine configuration.

🛠️ Operation & Maintenance

Proper operation and regular maintenance are important for hydraulic oil pressing equipment.

• Inspect visible hydraulic connections and components before operation.

• Check the narrow drainage slots for residue or blockage.

• Prepare raw materials according to the manufacturer's recommendations.

• Follow the specified pressing sequence and pressure settings.

• Clean the pressing chamber and oil-contact surfaces after operation.

• Inspect hydraulic seals and other service components at recommended intervals.

• Follow the manufacturer's instructions when operating or maintaining the control system.

Safety Reminder: Only trained personnel should operate or maintain the machine. Hydraulic components must be safely depressurized before inspection or servicing.

❓ Frequently Asked Questions

Q1. What is the 325 slotted vertical hydraulic oil press?

It is a vertical hydraulic oil pressing machine that uses a slotted pressing chamber for batch oil extraction. The chamber features narrow, vertically oriented drainage openings.

Q2. What is the difference between the 325 slotted and 325 round-hole models?

The main difference is the pressing chamber drainage structure. The slotted model uses narrow vertical openings, while the round-hole model uses small circular drainage openings.

Q3. How does the 325 series compare with the 290, 340 and 400 series?

These machines follow the same general hydraulic pressing principle but differ in dimensions and available configurations. Customers should compare confirmed specifications when selecting equipment.

Q4. Does the 325 slotted model include a separate control cabinet?

The 325 series is presented with a separate control cabinet beside the main machine. The final control configuration should be confirmed when ordering.

Q5. What is the production capacity of the 325 slotted hydraulic oil press?

Actual processing capacity depends on the raw material, pretreatment method, pressing chamber dimensions and operating conditions. Please contact us for the confirmed specifications of the selected machine.

Q6. Can the 325 slotted machine process different types of oilseeds?

Hydraulic oil presses may be suitable for different prepared oil-bearing materials. The compatibility of a specific material with the 325 slotted configuration should be confirmed before ordering.

Q7. How can I request a quotation?

Contact GOOD OIL PRESS through WhatsApp or email. Tell us which oil-bearing material you plan to process and your approximate production requirements so that we can discuss suitable equipment configurations.

📩 Request Technical Specifications & Quotation

Looking for a slotted hydraulic oil press for your oil processing project?

GOOD OIL PRESS can help you review available hydraulic oil press models and discuss suitable equipment according to your raw materials and processing requirements.

WhatsApp: +86 158 6386 2182
Email: Chinaoilpress@gmail.com

Contact us for technical specifications, configuration details and quotations.

workshop

workshop

workshop

workshop